# MA.1 QUICK START GUIDE

The VSSL MA.1 is a powerful, single-zone streaming amplifier that works seamlessly with your favorite music services. This guide will help you get started quickly.

**1. What's in the Box**

- VSSL MA.1 Streaming Amplifier
- Power Cable
- Wall Bracket
- Multi-language Safety Information Brochure

**2. Connections**

On the back of the MA.1 you'll find:

- **Network:** Ethernet port (recommended) or Wi-Fi setup via VSSL CNCT app
- **Inputs:** HDMI eARC, Aux, Optical, Digital Coax
- **Outputs:** RCA (Analog) and Optical
- **Subwoofer Output:** For connecting a subwoofer
- **Dual Type Binding Post Speaker Terminals:** Supports both screw-down and banana plug connections.
- **Controls:**
  - **Bluetooth Button -** Press to enter pairing mode (hold 3s to unpair)
  - **Reset Button -** Hold for 10s to restore to factory defaults
- **Power:** Plug into AC outlet

**3. LED Guide (BLAST™ LED)**

The center light bar indicates device status:

- White (Solid): Powered on, normal operation
- White (Pulsing): Ready for setup
- Royal Blue (Pulsing): Pairing mode
- Yellow (Flashing): Booting or restarting
- Green (Flashing): Paired successfully
- Purple (Pulsing): Firmware update in progress
- Red (Flashing): Error - reboot or reset
- Turquoise (Flashing): Find me active

**4. App Setup**

1. Download the VSSL CNCT App from the Apple App Store (iOS) or Google Play Store (Android)
2. Make sure your phone is on the same Wi-Fi network and that your Bluetooth is enabled.
3. Open the app - your MA.1 will appear ready for setup.
4. Follow the in-app instructions to:
   1. Name your device
   2. Connect to Wi-Fi (if not using Ethernet)
   3. Update firmware (if prompted)

**5. Play Your Music**

You can use any music streaming service that leverages one of these protocols:

- **AirPlay 2** (Apple Devices)
- **Google Cast** (Android and Chrome apps)
- **Spotify Connect and Tidal Connect**
- **Roon Ready, DLNA, UPnP**

Just open your favorite app, select the **Cast / AirPlay / Connect icon,** and choose your MA.1. Please use this link for additional instructions for each music streaming service: [Streaming Music with VSSL](https://vssl-help.zendesk.com/hc/en-us/articles/25897652373275-How-to-Stream-Music).

**6. Extra Features**

- **HDMI eARC:** Connect the MA.1 to an eARC-enabled HDMI output of your Television
- **Bluetooth 5.3 LE Audio:** Stream directly from your phone
- **LE Audio Pairing:** Ability to pair additional VSSL devices together
- **Infrared Control:** Learn your TV remote commands in the VSSL CNCT App
- **Auto Standby:** Device powers down after 15 minutes of inactivity (adjustable in the VSSL CNCT App)
- **12V Trigger:** 12 volt output turns on a connected amplifier that supports a voltage trigger

**7. Resetting**

To restore factory defaults:

- Press and hold the **Reset Button** for 10 seconds until the LED flashes **Orange,** then release.

**8. Support**

- **Website:** www.vssl.support
- **Email:** support@vssl.com
- **Phone:** 844-340-9111